Full Automatic Toilet Paper Machine (WD-TP-RPM1092/1575/2200/2500/2800II)
WD-TP-RPM1092/1575/2200/2500/2800II Dot-By-Dot High-Speed Rewinding and Perforating Toilet Paper Machine
I. Machine Brief Introduction
This machine is used to produce long toilet paper rolls or kitchen towel rolls which need to be cut in the cutting machines into small rolls.
II. Function and Features
Dot-By-Dot High-Speed Rewinding and Perforating Toilet Paper Machine is to perforate and cut the raw paper into various sizes according to the requests. The finished product is neat, in good order and with equal tension. It has the feature of compact structure, easy and stable operation, less electricity consumption and covers a small area of 8.4 m². The highest production speed is 120-160m/min. This equipment is adjustable to meet the requested finished product. This model is the ideal equipment for paper making factory and paper processing factory.
This equipment can process raw paper of 1.2m (1092II type) and 1.8m (1575II type) in width and longer width like 2.2m (2200I type), 2.45m (2500I type), 2.75m (2800I type) needs to be ordered.
This machine consists of raw material stands, paper conveying unit, embossing unit, perforating unit, rolling unit, electricity control and cutting system. The production process is: unwinding —→ embossing —→perforating—→cutting.
1. This model is designed with computer control system, fully automatic in production process, the function is complete and the production speed is high.
2. It can automatically exchange the core, winds, sprays, the glue and seals without stopping the machine and also automatically raise and lower speed when exchanging the core.
3. When exchanging the core, the machine will be tight first and loose later to avoid dropping off the roll core.
4. Equipped with automatic alarm to indicate filling up of core pipe. The machine will be automatically stopped when there is no core pipes.
5. Automatic alarm for breaking off of paper.
6. Equipped separate tension control for each unwinding jumbo roll.
7. It is convenient to change the feature to produce any other core pipe winding.
8. Left paper remind after sealing of product for convenient use.
9. Jumbo roll stand is installed with pneumatic lifting device.
10. Two embossing units are equipped to produce dot-by-dot products.
III. Technical Parameter
1. Production line：120-160m/min
2. Product size：￠80-￠150mm
3. Punching line distance：100-200mm (adjustable)
4. Power：8.5Kw (380V 50Hz) ( For your reference, it depends on the power situation in your place)
5. Overall size (L x W x H): 5.3x2.7x1.8m (with two embossing units, two paper stands)
6. Jumbo roll size: 1092II--1.2m, 1575II--1.8m
7. Weight: About 4T (with two embossing units, tow laying paper stands and one cutting machine)
Specification of Raw Paper
1. Width of raw paper: 1200mm-2750mm
2. Diameter of raw paper: 700mm-1000mm
3. Thickness of raw paper:14g/ m²-20g/ m²
4. Diameter of paper core：76mm
IV. Optional Equipment
1. Two embossing units can be equipped with 3 raw paper stands.
2. To equip three embossing units and 3 raw paper stands to have two patterns of embossing designs.
3. The machine to produce paper width of 1.2m to 2.75m, and other longer than 1.8m machine should be ordered.